Skip to main content

Pool equipment installation playbook

Goal​

Install pool equipment circuits and bonding that pass inspection and keep the pool area safe.

Inputs you must know before you start​

  • Equipment nameplate and installation instructions.
  • Pool layout, equipment pad location, and distances to the pool.
  • Equipment list (pump, heater, lights, control panels).

The path (in order)​

  1. Confirm equipment ratings and circuit requirements.
  2. Provide required disconnecting means and access.
  3. Install bonding grid and bond required metal parts.
  4. Apply receptacle and GFCI requirements for pool areas.
  5. Label circuits and test bonding continuity.

This is​

A checklist for pool equipment circuits, bonding, and disconnects.

This is not​

A pool design guide or hydraulic sizing tool.

Inspection-ready checklist​

  • Equipment installed per listing and instructions.
  • Disconnecting means provided where required.
  • Bonding grid and metal parts bonded.
  • Pool receptacle placement and GFCI requirements met.
  • Circuits labeled and bonding continuity verified.

Worked example​

A pool pad includes a pump and heater. You install listed equipment circuits, place disconnects within required distances, bond the metal equipment and reinforcing grid, and verify the required convenience receptacle with GFCI.

Cross references​

  • Primary: 680.12, 680.21, 680.26
  • Secondary: 680.22, 110.3(B)

Related